Exloc Instruments corporate logo
Exloc Instruments: your one-stop-shop for instruments and electrical equipment for use in hazardous classified locations.
Saving you time & money solving challenging problems!

Explosion Proof Flashing Alarm Beacons & Signals
Provide Alarm Notification in Hazardous Locations & Extreme Environments
BExBG05 Xenon Flashing Beacon
with Bright 5 Joule Output
Photo of E2S Model BExBG05 explosion proof and flameproof flashing beacon for use in hazardous classified locations
  • Explosion Proof / Flameproof
  • Zones 1, 2, 21 & 22; Groups IIC, IIB & IIA
  • ATEX, IECEx & GOST-R certification
  • 5 Joule (5Ws)
  • 1Hz flash cycle
  • Automatic synchronization and optional "flip-flop" mode on multi beacon systems
  • Six available lens colors
  • Stainless steel racheting mounting bracket and dome guard
  • IP66 & IP67
  • AC & DC supply options
Mark of certification to ATEX Directive Mark of certification to IECEx standards Mark of certification to GOST standards
BExBG05 Specifications
Available Models
BExBG05D
BExBG05E
Certification (specify when ordering)
ATEX versions:
1. EEx d IIC T5 Ta -50 to +55°C T100°C
and EEx d IIC T6 Ta -50 to +40°C T85°C
2. EEx d IIC T4 Ta -50 to +70°C T115°C
Certificate: KEMA, 00ATEX2006 X

IECEx versions:
1. EX d IIC T5 Ta 55°C IP67
and DIP A21 TA T5 IP67 (Ta -40 to +55°C)
Certificate: IECEx SIM 04.0002

GOST-R versions:
1. 1ExdIICT4 Ta -50 to +55°C T100°C
and DIP A21 TA T4
Certificate: POCC GB.JB05.B022005
ATEX versions:
3. EEx de IIC T5 Ta -50 to +55°C T100°C
and EEx de IIC T6 Ta -50 to +40°C T85°C
4. EEx de IIC T4 Ta -50 to +70°C T115°C
Certificate: KEMA, 00ATEX2006 X

GOST-R versions:
2. 2ExdeIICT4 Ta -50 to +55°C T100°C
and DIP A21 TA T4
Certificate: POCC GB.JB05.B022005
Light Source
Xenon, 5 Joule @ 1Hz (5 Ws),
emissions reduced to 70% after 8 million flashes.
Xenon tube mechanically secured against vibration/shock.
Lens colors: red, amber/orange, blue, green, yellow, clear.
Power Supply Options
12VDC (10-14V) @ 750mA
24VDC (20-28V) @ 270mA
48VDC (42-54V) @ 180mA
115VAC ±10% 50-60Hz @ 140mA
230VAC ±10% 50-60Hz @ 55mA
Operating Temperature Range
-58 to +131°F / -50 to +55°C except where limited by certification
Storage Temperature Range
-58 to +158°F / -50 to +70°C
Materials
Body: Marine grade copper free LM6 aluminum, phospate & powder-coated;
Mounting bracket: stainless steel;
Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection
IP 67
IP 66
Cable Entry
Two M20 ISO cable glands, one blanking plug
Terminations
IN & OUT terminals for 0.5 to 4.0mm² wire
Weight
DC power: 5.40lb / 2.45Kg; AC power: 6.06lb / 2.75Kg
Other
DC powered versions include provision for end-of-line resistors or diode (see instruction manual download below)
Photo of E2S Model BExBG05 explosion proof and flameproof flashing beacon for use in hazardous classified locations BExBG10 Xenon Flashing Beacon
with Brighter 10 Joule Output
  • Explosion Proof / Flameproof
  • Zones 1, 2, 21 & 22; Groups IIC, IIB & IIA
  • ATEX, IECEx & GOST-R certification
  • 10 Joule (10Ws)
  • 1Hz flash cycle
  • Automatic synchronization and optional "flip-flop" mode on multi beacon systems
  • Six available lens colors
  • Stainless steel racheting mounting bracket and dome guard
  • IP66 & IP67
  • AC & DC supply options
Mark of certification to ATEX Directive Mark of certification to IECEx standards Mark of certification to GOST standards
BExBG10 Specifications
Available Models
BExBG10D
BExBG10E
Certification
EEx d IIC T4 (Tamb. -50 to +55°C)
EEx d IIC T5 (Tamb. -50 to +40°C)
See certificate downloads below
EEx de IIC T4 (Tamb. -50 to +55°C)
EEx de IIC T5 (Tamb. -50 to +40°C)
See certificate downloads below
Light Source
Xenon, 10 Joule @ 1Hz (10 Ws),
emissions reduced to 70% after 8 million flashes.
Xenon tube mechanically secured against vibration/shock.
Lens colors: red, amber/orange, blue, green, yellow, clear.
Power Supply Options
12VDC (10-14V) @ 1.45A
24VDC (20-28V) @ 660mA
48VDC (42-54V) @ 340mA
115VAC ±10% 50-60Hz @ 250mA
230VAC ±10% 50-60Hz @ 110mA
Operating Temperature Range
-58 to +131°F / -50 to +55°C except where limited by certification
Storage Temperature Range
-58 to +158°F / -50 to +70°C
Materials
Body: Marine grade copper free LM6 aluminum, phospate & powder-coated;
Mounting bracket: stainless steel;
Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection
IP 67
IP 66
Cable Entry
Two M20 ISO cable glands, one blanking plug
Terminations
IN & OUT terminals for 0.5 to 4.0mm² wire
Weight
DC power: 5.40lb / 2.45Kg; AC power: 6.06lb / 2.75Kg
Other
DC powered versions include provision for end-of-line resistors or diode (see instruction manual download below)
Photo of E2S Model BExBG05 explosion proof and flameproof flashing beacon for use in hazardous classified locations BExBG15 Xenon Flashing Beacon
with Even Brighter 15 Joule Output
  • Explosion Proof / Flameproof
  • Zones 1, 2, 21 & 22; Groups IIC, IIB & IIA
  • ATEX, IECEx & GOST-R certification
  • 15 Joule (15Ws)
  • 1Hz flash cycle
  • Automatic synchronization and optional "flip-flop" mode on multi beacon systems
  • Six available lens colors
  • Stainless steel racheting mounting bracket and dome guard
  • IP66 & IP67
  • AC & DC supply options
Mark of certification to ATEX Directive Mark of certification to IECEx standards Mark of certification to GOST standards
BExBG15 Specifications
Available Models
BExBG15D
BExBG15E
Certification
EEx d IIC T4 (Tamb. -50 to +55°C)
EEx d IIC T5 (Tamb. -50 to +40°C)
See certificate downloads below
EEx de IIC T4 (Tamb. -50 to +55°C)
EEx de IIC T5 (Tamb. -50 to +40°C)
See certificate downloads below
Light Source
Xenon, 15 Joule @ 1Hz (15 Ws),
emissions reduced to 70% after 8 million flashes.
Xenon tube mechanically secured against vibration/shock.
Lens colors: red, amber/orange, blue, green, yellow, clear.
Power Supply Options
24VDC (20-28V) @ 860mA
48VDC (42-54V) @ 480mA
115VAC ±10% 50-60Hz @ 360mA
230VAC ±10% 50-60Hz @ 170mA
Operating Temperature Range
-58 to +131°F / -50 to +55°C except where limited by certification
Storage Temperature Range
-58 to +158°F / -50 to +70°C
Materials
Body: Marine grade copper free LM6 aluminum, phospate & powder-coated;
Mounting bracket: stainless steel;
Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection
IP 67
IP 66
Cable Entry
Two M20 ISO cable glands, one blanking plug
Terminations
IN & OUT terminals for 0.5 to 4.0mm² wire
Weight
DC power: 5.40lb / 2.45Kg; AC power: 6.06lb / 2.75Kg
Other
DC powered versions include provision for end-of-line resistors or diode (see instruction manual download below)
Photo of E2S Model BExBG05 explosion proof and flameproof flashing beacon for use in hazardous classified locations BExBG21D Xenon Flashing Beacon
with Brightest 21 Joule Output
  • Explosion Proof / Flameproof
  • Zones 1, 2, 21 & 22; Groups IIC, IIB & IIA
  • ATEX certification
  • 21 Joule (21Ws), dual Xenon tubes
  • 1Hz single flash, 2Hz alternate flash, 1 Hz double strike flash.
  • Remotely selectable 2nd. stage patterns (DC powered versions only)
  • Six available lens colors
  • Stainless steel racheting mounting bracket and dome guard
  • IP67 ingress protection
  • AC & DC supply options
Mark of certification to ATEX Directive
BExBG21D Specifications
Certification
II 2G/D EEx d IIC T4 Ta. -50 to +55°C T135°C
II 2G/D EEx d IIC T3 Ta. -50 to +70°C T200°C
See certificate & user manual downloads below
Light Source
Xenon, 21 Joule @ 1Hz (21 Ws),
emissions reduced to 70% after 8 million flashes.
Dual Xenon tubes mechanically secured against vibration/shock.
Lens colors: red, amber/orange, blue, green, yellow, clear.
Signaling Patterns
Selectable Patterns:
Single flash @ 1Hz (both tubes flashing together),
Alternate flash @ 2Hz (tubes flashing alternatively),
Double strike @ 1Hz (one tube flashing immediately after the other).

Remotely controlled 2nd. stage patterns (DC powered versions):
Single flashes change to alternating flashes,
Alternating flashes change to single flashes,
Double strike flashes change to single flashes.
Power Supply Options
24VDC (20-28V) @ 1.2A
48VDC (42-54V) @ 600mA
115VAC ±10% 50-60Hz @ 560mA
230VAC ±10% 50-60Hz @ 280mA
Operating Temperature Range
-58 to +158°F / -50 to +70°C except where limited by certification
Storage Temperature Range
-58 to +158°F / -50 to +70°C
Materials
Body: Marine grade copper free LM6 aluminum, phospate & powder-coated;
Mounting bracket: stainless steel;
Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection
IP 67
Cable Entry
Two M20 ISO cable glands, one blanking plug
Terminations
IN & OUT terminals for 0.5 to 4.0mm² wire
Weight
DC power: 5.40lb / 2.45Kg; AC power: 6.06lb / 2.75Kg
Other
DC powered versions include provision for end-of-line resistors or diode (see instruction manual download below)
Photo of E2S Model BExBGL1D explosion proof and flameproof flashing LED beacon for use in hazardous classified locations BExBGL1D LED Beacon
with multiple signaling modes
  • Explosion Proof / Flameproof
  • Zones 1, 2, 21 & 22; Groups IIC, IIB & IIA
  • ATEX certification
  • 32 high output LED array
  • Flashing, steady, and rotating light modes
  • Remotely selectable 2nd. & 3rd. stage modes
  • Four available lens colors
  • Stainless steel racheting mounting bracket and dome guard
  • IP67 ingress protection
  • AC & DC supply options
Mark of certification to ATEX Directive
BExBGL1D Specifications
Certification
II 2G/D EEx d IIC T4 Ta. -50 to +55°C T105°C
II 2G/D EEx d IIC T5 Ta. -50 to +40°C T95°C
See certificate & user manual downloads below
Light Source
Array of 32 high output LEDs
with optically enhanced prismatic lens cover.
Lens colors: red, amber/orange, blue, green.
Signaling Patterns
Total of 9 signaling modes:
4 rotating configurations,
4 flashing configurations,
Steady mode for indicator / status applications.
Remotely controlled 2nd. & 3rd. stage modes (see manual).
Power Supply Options
24VDC (10-50V) @ 400mA
48VDC (10-50V) @ 230mA
24VAC ±10% 50-60Hz @ 380mA
115VAC ±10% 50-60Hz @ 140mA
230VAC ±10% 50-60Hz @ 70mA
Operating Temperature Range
-58 to +131°F / -50 to +55°C except where limited by certification
Storage Temperature Range
-58 to +158°F / -50 to +70°C
Materials
Body: Marine grade copper free LM6 aluminum, phospate & powder-coated;
Mounting bracket: stainless steel;
Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection
IP 67
Cable Entry
Two M20 ISO cable glands, one blanking plug
Terminations
IN & OUT terminals for 0.5 to 4.0mm² wire
Weight
DC power: 5.40lb / 2.45Kg; AC power: 6.06lb / 2.75Kg
Other
DC powered versions include provision for end-of-line resistors or diode (see instruction manual download below)
You may also be interested in these related products:
alarm sounders • alarm annunciators • intrinsically safe beacons • solenoid valves

legal notice • site map • top of page
This page last updated 1/25/10. ©2004–2010 Exloc Instruments, Inc. All rights reserved.