Non-Incendive Flashing Beacons for Division 2 Hazardous Classified Locations

Exloc Instruments: your one-stop-shop for instruments and electrical equipment for use in hazardous classified locations.
Saving you time & money solving challenging problems!

Non Incendive Flashing Alarm Beacons
For Alarm Notification in Hazardous Areas & Extreme Environments

Photo of E2S Model E2xbB05 non-incendive 5 Joule flashing beacon for use in hazardous classified locations

E2xB05 Xenon Flashing Beacon
with Bright 5 Joule Output

Non-incendive
UL & ATEX certification
5 Joule (5Ws)
1Hz flash cycle
User replaceable Xenon tube assembly
Six available lens colors
Stainless steel racheting mounting bracket and dome guard
IP66 & IP67 / NEMA 4, 4X & 13
Multiple AC & DC voltage options

E2xB05 Specifications
Available Models	E2xB05-UL	E2xB05-EG
Certification	UL Approved, US & Canada Cl I, Div 2, Grp A-D T2D @ +55°C Cl I, Div 2, Grp A-D T3 @ +40°C Cl II, Div 2, Grp F&G T5 @ +55°C Cl II, Div 2, Grp F&G T6 @ +40°C Cl III, Div 1, T5 @ +55°C Cl III, Div 1, T6 @ +40°C File No. E254313	ATEX certified Ex II 3G EEx nA nL IIC T2 (Tamb -20 to +55°C) Ex II 3G EEx nA nL IIC T3 (Tamb -20 to +40°C) Cert: DEMKO 06 ATEX 0421554
Light Source	Xenon, 5 Joule @ 1Hz (5 Ws), user replaceable. Xenon tube mechanically secured against vibration/shock. Lens colors: red, amber/orange, blue, green, yellow, clear.
Power Supply Options	12VDC (10-14V) @ 520mA 24VDC (20-28V) @ 275mA 48VDC (42-58V) @ 145mA 120VAC ±10% 50-60Hz @ 80mA 230VAC ±10% 50-60Hz @ 30mA
Operating Temperature	-4 to +131°F / -20 to +55°C
Materials	Body: UL94V0 & ABS; Mounting bracket: stainless steel; Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection	NEMA TYPE 4 / 4X / 13	IP 66 / IP67
Cable Entry	One ½"NPT	Two M20
Terminations	18" / 0.5m flying leads	Terminals for 0.5 to 2.5mm² wire
Weight	3.26lb / 1.48Kg
Other	UL Approval includes for end-of-line resistor on DC-powered versions (see instruction manual)	ATEX certification includes for in/out wiring (see instruction manual)

Photo of E2S Model E2SxB10 non-incendive flashing beacon for use in hazardous classified locations

E2xB10 Xenon Flashing Beacon
with Extra Bright 10 Joule Output

Non-incendive
UL & ATEX certification
10 Joule (5Ws)
1Hz flash cycle
User replaceable Xenon tube assembly
Six available lens colors
Stainless steel racheting mounting bracket and dome guard
IP66 & IP67 / NEMA 4, 4X & 13
Multiple AC & DC voltage options

E2xB10 Specifications
Available Models	E2xB10-UL	E2xB10-EG
Certification	UL Approved, US & Canada Cl I, Div 2, Grp A-D T2A @ +55°C Cl II, Div 2, Grp F&G T4A @ +55°C Cl II, Div 2, Grp F&G T5 @ +40°C Cl III, Div 1, T4A @ +55°C Cl III, Div 1, T5 @ +40°C File No. E254313	ATEX certified Ex II 3G EEx nA nL IIC T2 (Tamb -20 to +55°C) Cert: DEMKO 06 ATEX 0421554
Light Source	Xenon, 10 Joule @ 1Hz (5 Ws), user replaceable. Xenon tube mechanically secured against vibration/shock. Lens colors: red, amber/orange, blue, green, yellow, clear.
Power Supply Options	24VDC (20-28V) @ 560mA 48VDC (42-58V) @ 260mA 120VAC ±10% 50-60Hz @ 185mA 230VAC ±10% 50-60Hz @ 107mA
Operating Temperature	-4 to +131°F / -20 to +55°C
Materials	Body: UL94V0 & ABS; Mounting bracket: stainless steel; Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection	NEMA TYPE 4 / 4X / 13	IP 66 / IP67
Cable Entry	One ½"NPT	Two M20
Terminations	18" / 0.5m flying leads	Terminals for 0.5 to 2.5mm² wire
Weight	3.26lb / 1.48Kg
Other	UL Approval includes for end-of-line resistor on DC-powered versions (see instruction manual)	ATEX certification includes for in/out wiring (see instruction manual)

Photo of E2S model E2xCS112-05 non-incendive combined alarm horn sounder and Xenon flashing beacon for use in hazardous classified locations

E2xCS112-05 Combination Alarm Horn Sounder & Flashing Beacon

Non-incendive
UL & ATEX certification
110 dB(A) output
45 alarm tones, 3 alarm stages
UKOOA / PFEER compliant tones
Integral 5 Joule Xenon strobe beacon
Horn and beacon can share same power source or operate individually
Choice of six lens colors
Volume control
Stainless steel racheting mounting bracket
IP66 / IP67 / NEMA 4, 4X & 13
Auto synchronization

E2xCS112-05 Specifications
Available Models	E2xCS112-05-UL		E2xCS112-05-EG
Certification	UL Approved, US & Canada Cl I, Div 2, Grp A-D T2D @ +55°C Cl I, Div 2, Grp A-D T3 @ +40°C Cl II, Div 2, Grp F&G T6 @ +55°C Cl III, Div 1 T6 @ +55°C File No. E230764		ATEX certified Ex II 3G EEx nA nL IIC T2 (Tamb -20°C to +55°C) Ex II 3G EEx nA nL IIC T3 (Tamb -20°C to +40°C) Cert: DEMKO 06 ATEX 0421554
Alarm Sound Output	110 dB(A) @ 1 m ±3dB
Effective Range	328' / 100m @ 1kHz
Power Supply Options	24VDC (10-30V) @ 284mA (sounder), 275mA (beacon) 48VDC (38-58V) @ 146mA (sounder), 145mA (beacon) 120VAC ±10% 50-60Hz @ 104mA (sounder), 80mA (beacon) 230VAC ±10% 50-60Hz @ 54mA (sounder), 30mA (beacon)
Alarm Sound Modes	45 alarm tones, (PFEER/UKOOA compliant), 3 stages remotely selectable
Beacon Details	Xenon, 5 Joule @ 1Hz (5 Ws), user replaceable. Xenon tube mechanically secured against vibration/shock. Lens colors: red, amber/orange, blue, green, yellow, clear.
Operating Temperature	-4 to +131°F / -20 to +55°C
Materials	Body: UL94V0 & ABS; Mounting bracket: stainless steel; Glass dome: borosilicate; Glass dome guard: stainless steel
Environmental Protection	NEMA TYPE 4 / 4X / 13		IP 66 / IP67
Cable Entry	One ½"NPT		Two M20
Terminations	18" / 0.5m flying leads		Terminals for 0.5 to 2.5mm² wire
Weight	6.6lb / 3.0Kg	7.72lb / 3.5Kg	6.6lb / 3.0Kg	7.72lb / 3.5Kg
Other	UL Approval includes for end-of-line resistors on DC-powered versions (see instruction manual)		ATEX certification includes for in/out wiring (see instruction manual)

You may also be interested in these related products:
alarm sounders • alarm annunciators • intrinsically safe beacons • solenoid valves

legal notice • site map