Saving you time & money solving challenging problems!
Get the Picture in Hazardous Locations and Extreme Environments
with new lens and 3X brighter flash,
FM Approval for USA & Canada
- Intrinsically safe, FM approved, ATEX & IECEx certified
- Simple "point & shoot" operation
- Optical viewfinder
- 3.1 Megapixels
- 1 GB flash memory, 5000 photos
- Image stabilization
- Super bright 131 lux.sec. four-LED flash
- Voice recording in .wav format
- User upgradable firmware
- Compact - fits in pocket
- Included silicon rubber sleeve for extra grip
- Powered by AA batteries
- Replacement for iCAM500 & original iCAM501
Made of rugged injection molded anti-static plastic the iCAM501 Ultra is IP65 rated for use in the most arduous environments, yet weighs only 7 ounces (200g). The slim stick shaped design permits single-handed operation and convenient pocket carry, and the included silicon rubber sleeve provides extra grip—especially when wearing gloves. Certified for use with leading brand AA alkaline batteries.
Image stabilization and a high performance lens provide high quality images with exceptional depth of field. Super bright LED flash with automatic variable intensity provides illumination under the worst conditions. 3.1 megapixel resolution and 1GB NAND flash memory allow up to 5,000 jpeg images to be stored. Easy PTP download via USB port. Images are time & date stamped. User upgradable firmware.
Recorded voice annotations in .wav format saved with the corresponding image filenames for easy retrieval and matching.
Firmware upgrade for your original iCAM501: download the latest firmware here.
Full factory upgrade for your original iCAM501 to the new Ultra specs: get quote here.
Replacement silicone rubber sleeve (fits original iCAM501 and iCAM501 Ultra): get quote here.
| iCAM 501 Ultra Specifications | |
| FM Certification for USA & Canada |
Class I, Div 1, Grps ABCD, T4 Ta= -20°C to +55°C when using Duracell Plus or Procell MN1500 batteries; Class I, Div 1, Grps ABCD, T3C Ta= -20°C to +50°C when using Duracell Procell PC1500 or Energizer E91 batteries |
| ATEX Certification for European Community |
II 1 G Ex ia IIB T4 Ga, II 1 G Ex ia IIC T4 Gb, -20°C ≤Ta≤ +60°C I M1 Ex ia I Ma 0°C ≤Ta≤ +60°C |
| IECEx Certification for Accepting Regions |
II 1 G Ex ia IIB T4 Ga, II 1 G Ex ia IIC T4 Gb, -20°C ≤Ta≤ +60°C I Ex ia I Ma 0°C ≤Ta≤ +60°C |
| Operating Ambient Temperature Range | USA & Canada: +4 to +140°F / -20°C to +55°C max. depending upon battery choice. See user manual for usage table. ATEX/IECEx Group II hazards: +4 to +140°F / -20 to +60°C ATEX/IECEx Group I hazards: +32 to +140°F / 0 to +60°C |
| Image | 3.1 Megapixel, 2048 x 1536 resolution, jpeg format |
| Optical Lens | Fixed focus, glass, 1/4" format, in plastic holder |
| Focal Distance | 12" / 30cm to infinity |
| Viewfinder | Two-element optical viewfinder |
| Flash | 4-LED flash giving 131 lux.seconds of energy at 67ms exposure |
| Audio Recording | .wav format, files correspond to image filenames |
| Memory | On-board 1GB NAND flash; holds approx. 5,000 jpeg images without audio recording, additional 960 Kbytes per minute for audio. |
| Time & Date | Time and date stamping of stored images and file names. Time and date set via Picture Transfer Protocol (PTP) automatically. |
| Connectivity | USB 1.1 via mini-USB socket for use in un-classified locations. |
| OS Support | PTP imaging device in Windows 2000/XP/Vista/7, Mac OSX 10.x, and most versions of Linux. USB firmware upgrade utility available for Windows 2000/XP/Vista/7 only. |
| Dimensions | 5.20" x 1.26" x 0.87" / 132 x 32 x 22 mm |
| Weight | Approx. 7oz. / 200g including batteries |
| Environmental Protection | IP65; injection molded anti-static plastic housing. |
| Relative Humidity | 95% RH non-condensing |
| Power Source | 2x Duracell Plus / Procell MN1500, Duracell Procell PC1500, or Energizer E91 alkaline AA batteries depending upon applicable regional certification and maximum ambient temperature. No substitutions permitted. See user manual for usage table. |
| Power Modes | Operate, and auto power-down (after 3 min.) |
| Battery Life | Up to 800 shots without flash, or up to 150 shots with flash, all made in quick succession. 310 shots as per the CIPA DC-002 standard (mixed mode shots with and without flash). Perfomance is influenced by many factors including ambient temperature, length of time camera is powered up, number of voice recordings, and frequency and length of time camera is connected to PC for data download. |
| Compliance | EMC: EN 55022 1998 class B, EN 55024 1999, LV: EN 60950 2002, FCC Class A device, compliance through verification route. |
| In the Box | iCAM501U digital camera, lanyard/wrist strap, removable silicon rubber sleeve, 2x AA alkaline batteries |
|
|
|
Make composition easier when using the iCAM501 Ultra in low light conditions
- Intrinsically safe
- Only headlamp approved for Cl I, Div 1, A-D
- 24 white LEDs
- 38 Lumens
- Low profile with 90° tilt
- Powered by 4x AA batteries
- Up to 8 hours at full power
- Tap switch
- Waterproof to 20 feet / 6 meters
- 12 month warranty
Designed for use with or without a safety helmet the Performance has an attached battery pack* containing four AA batteries, yet the weight is only a fraction over 10 ounces. The low profile LED light bar may be tilted downwards and power is turned on & off by a simple tap switch. It works best for activities within a 20 foot range, but can illuminate up to 150 feet away.
*Note that operation in hazardous locations requires that the battery pack may not be opened. Batteries may only be changed when the headlamp has been returned to a non-hazardous location.
| Performance Headlamp Specifications | |
| I.S. Approval | Cl I, Div 1, Grps A-D, T6; Cl I, Div 2, Grps A-D, T6, by MET to UL 913 |
| Light Output | 480 CP / 38.2 Lumens |
| Light Field | Field of vision: 45° Distance vision: 120-150 feet / 36-45 meters Peripheral vision: up to 60 feet / 18 meters |
| Light Source | 24 white LEDs |
| Environmental | Impact resistant; waterproof to 20 feet / 6 meters |
| Materials of Construction | Housing: polycarbonate Headband strap: elastic Wiring: PVC jacketed cable |
| Weight | Total: 10.1 oz / 287 g Headband: 3.4 oz / 97 g Battery pack: 6.7 oz / 190 g |
| Power | 4x AA battery (battery pack is integral and NOT remotable) |
| Battery Life | Full power: up to 8 hours, Reserve power: up to 12 hours, dependent upon battery quality and ambient temperature. |
| Warranty | 12 months |
| Order part number: | 400-FF417-2 |
|
|
|
- Intrinsically safe
- Cl I, Div 1, Grp C&D; Cl I, Div 2, Grp A-D
- 24 white LEDs
- 24.8 Lumens
- Bumper style housing
- Powered by 4x AA batteries
- Up to 8 hours at full power
- Waterproof to 20 feet / 6 meters
- 12 month warranty
| Signature Headlamp Specifications | |
| I.S. Approval | Cl I, Div 1, Grps C&D, T6; Cl I, Div 2, Grps A-D, T6, by MET to UL 913 |
| Light Output | 312 CP / 24.8 Lumens |
| Light Field | Field of vision: 45° Distance vision: 100-120 feet / 30-36 meters Peripheral vision: up to 60 feet / 18 meters |
| Light Source | 24 white LEDs |
| Environmental | Impact resistant; waterproof to 20 feet / 6 meters |
| Materials of Construction | Housing: SARLINK High temperature thermoplastic elastomer Headband strap: elastic Wiring: silicon coated Teflon jacketed cable |
| Weight | Total: 11.9 oz / 337 g Headband: 5.2 oz / 147 g Battery pack: 6.7 oz / 190 g |
| Power | 4x AA battery (battery pack is integral and NOT remotable) |
| Battery Life | Full power: up to 8 hours, Reserve power: up to 16 hours, dependent upon battery quality and ambient temperature. |
| Warranty | 12 months |
| Order part number: | 200-FF261-2 |
|
|
|
I.S. multimeters • I.S. PDAs • I.S. cell phones