Exloc Instruments corporate logo
Exloc Instruments: your one-stop-shop for instruments and electrical equipment for use in hazardous classified locations.
Saving you time & money solving challenging problems!
New product icon
New Products and Upgrades
February 2012 — iTAG500 passive UHF RFID tags can be read up to 115 feet away. Excellent read signal, on, off, and near metals & liquids. Built with Omni-ID plasmonic technology, and have ATEX & IECEx intrinsic safety certification. FM approval pending. Rugged, durable construction. Optimized across 806-960MHz for global functionality. Exloc has been appointed as distributor for the U.S. & Canada. Learn more...
November 2011 — New iUPS101 provides 3 kVA battery backup power for 35 minutes in Zone 1 hazardous areas. A second battery module doubles the run time, and two systems can be connected in parallel for up to 6 kVA and 70 minutes. Status indication and alarm output, advanced charging technology with temperature compensation, and ATEX certification. Learn more...
October 2011 — Building on the success of the original iCAM501 hazloc digital camera comes the new iCAM501 Ultra. A new lens and three times brighter flash provides improved image quality under all lighting conditions. It also comes with a form-fitting silicon rubber sleeve for better grip and protection against scuffs and scrapes. Factory Mutual approved for USA & Canada, plus ATEX and IECEx certification for international use. The most compact and lightweight camera for hazardous locations. Learn more...
September 2011 — The A25is intrinsically safe handset combines Phone, PDA, and GPS functions in one rugged yet lightweight device. Reduces ROI by eliminating multiple purchases. Powerful Intel® XScale 416MHz CPU handles business-critical applications. GSM Quad-Band, GPRS, EDGE, BT, USB, and optional LAN/Wi-Fi. 240x320 TFT display with millions of colors. Learn more...
August 2011 — This rugged and sunlight-readable Tablet PC is CSA approved for Div. 2/Zone 2 in the U.S. & Canada, and ATEX certified for Zone 2 the E.C. Tougher than MIL-STD-810G, it survives repeated drops from 4 feet onto concrete. Runs Windows® 7 64-bit OS using Intel® Core™ i7 2.13GHz processor, DDR3 memory, and mSATA SSD drives. RAID 0,1 capable. Dual-mode 10,4" display, Li-ION battery, 802.11 a/b/g/n, GPS, etc. Learn more...
Photo of Extronics iCAM501 intrinsically safe digital camera for use in hazardous classified locations.
July 2011 — New firmware upgrade for the iCAM501 intrinsically safe digital camera is now available for download. Version 11.07.11 adds variable flash intensity, improves blurring analysis during image stabilization for better pictures, and fixes a compatibility issue with Apple OS X. Update your iCAM501 for free with this easily installed update. Learn more...
June 2011 — New Exloc office opens in Houston, Texas, to provide direct sales and customer support in the Gulf Coast region. The new office provides a local venue for meetings, presentations, and product inventory. Convenient freeway location at 4702 N. Sam Houston Pkwy. W., Suite 300-A, Houston, TX 77086. Tel: 281-978-2040. Learn more...
May 2011 — Self-testing Static Control Cable for liquid or powder transfers where no permanent grounding monitor is available. Provides reliable bond between modile equipment and a structural ground. Stainless steel clamps with tungsten carbide teeth. Flashing LED confirms good bond. FM, CSA, ATEX approvals for use in hazardous classified locations. Learn more...
April 2011 — Uninterruptible Power Supplies for Zone 1 & 2 are designed to maintain critical measurement and control functions, preserve data, and permit orderly shut-down of electronic equipment during power brown outs and supply disturbances. Extronics iUPS have ATEX certification for use in hazardous locations, and are built for reliable operation in extreme environments. Learn more...
Photo of Extronics iWAP201A Zone 2 wireless access point/network bridge/mesh router.
April 2011 — Economical Multi-mode 802.11 a/b/g Radio comes pre-installed in an IP66 rated, 316L stainless steel enclosure for use in a Zone 2 hazardous locations and harsh, wet, and corrosive environments. Optional surge arrestors, internal heaters, etc. A great ATEX certified WLAN solution as an access point, network bridge, or mesh router. Learn more...
December 2010 — New explosion proof wireless AP enclosure is FM Approved for use in Division 1 hazardous locations in the U.S. and Canada. The new Extronics iWAP105 comes preconfigured with a choice of radios from popular vendors, or can be assessed for compatibility with the hardware of your choice. The FM approval covers Class I, II, and III hazards. Learn more...
September 2010 — New fieldbus indicators can display up to eight variables using 20mm digits and a 31 segment bargraph. Models include field and panel mounting, intrinsically safe, Type n, and general purpose versions. FOUNDATION Fieldbus and Profibus PA protocols are supported with Node and/or Listener functionality. Learn more... Photo of Beka multi-variable fieldbus indicators for Foundation Fieldbus and Profibus PA protocols
April 2010 — "Belly Pack" style transmitters & paired receivers operate on 900MHz and 2.4GHz unlicensed ISM bands to wirelessly control plant and machinery in hazardous classified locations and extreme environments. Give equipment operators freedom of movement and oversight using FM approved multi-function radios to interface with hydraulic, electrical, and pneumatic control systems. Learn more...
Photo of a Miratron remote control belly pack
Copyright ©2004 – 2011
Exloc Instruments, Inc.
All rights reserved.
This page last updated 2/2/12 legal noticesite map