For our universal access points and MESH router systems, or where the wireless network hardware is to be installed in a general purpose location, the iANT100 series of omni-directional "increased safety" antennas are ideal. These extremely rugged antennas may be connected to any wireless transmitter without requiring knowledge of the internal electronics or needing to make a fault analysis fo the device.

For the iWAP102 and iWAP200 series of access points and MESH routers the iANT200 series of intrinsically safe antennas provide the best possible coverage and network performance. A variety of designs include omni-directional, sector, and directional to provide optimum coverage, bandwidth, and distance for the wireless network.

In outdoor applications the risk of lightning strikes causing large power surges poses a real and serious threat to the installed network infrastructure. We offer a range of surge arrestors for the antenna as well as power and data connections. As a minimum, we recommend that all outdoor access points and MESH routers be fitted with antenna surge arrestors. Ask for our recommendations.

• Increased safety, Zone 1 / 21 certified
• ATEX II 2 GD EEx e II T6 (Ta= -40°C to +60°C) IP66
• Factory Mutual Class I Division 1 approval pending
• IP66
• 5 dBi gain at 2.4 GHz
• 8 dBi gain at 5.8 GHz

• Increased safety, Zone 1 / 21 & 2 / 22 certified
• ATEX II 2 GD EEx e II T6 (Ta= -40°C to +60°C) IP66
• Factory Mutual Class I Division 1 approval pending
• IP66
• 5 dBi gain at 2.4 GHz
• 8 dBi gain at 5.8 GHz

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T6
• Factory Mutual Class I Division 1 approval pending
• IP66
• 5dBi gain
• Frequency range 2.3 - 2.5 GHz

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T4
• Factory Mutual Class I Division 1 approval pending
• IP66
• 6dBi gain at 2.4 GHz
• 10dBi gain at 5.8 GHz

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T5/T6
• Factory Mutual Class I Division 1 approval pending
• IP66
• 8.5dBi gain with 80° beamwidth
• Frequency range 2.3 - 2.5 GHz

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T5/T6
• Factory Mutual Class I Division 1 approval pending
• IP66, plastic body
• 4 dBi gain, omni-directional in azimuth plane, plus 20° uptilt capability
• Covers 2.4 GHz band

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T6
• Factory Mutual Class I Division 1 approval pending
• IP54, plastic body
• 5 dBi gain, 3 dB azimuth beamwidth of 135° and E-plane beamwidth of 55°
• Covers 2.4 GHz band

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T6/T5
• Factory Mutual Class I Division 1 approval pending
• IP68, chemical resistant body
• Up to 23 dBi gain for point-to-point applications
• 2.4 & 5.8 GHz versions
• Up to 23 dBi gain for point-to-point applications

• Intrinsically safe, Zones 0, 1 & 2 certified
• ATEX II 1 G Ex ia IIC T6/T5
• Factory Mutual Class I Division 1 approval pending
• IP65, UV stable body
• 3 dBi gain, 90° or 120° beamwidths
• 2.4 & 5.8 GHz versions

• Split a single RF output between two antennas facing different directions
• Certified "simple apparatus"
• Wide band: 1.7 to 9.0 GHz
• IP54 rugged shielded case
• Insertion loss typically 1.4dB