Exloc Instruments: your one-stop-shop for instruments and electrical equipment for use in hazardous classified locations.
Saving you time & money solving challenging problems!
Saving you time & money solving challenging problems!
Wireless Access Points & MESH Routers
Provide Wi-Fi in Hazardous Areas and Extreme Environments
Provide Wi-Fi in Hazardous Areas and Extreme Environments
Universal models permit the installation of equipment from leading WLAN vendors such as Symbol, Cisco, Firetide, and many others. The enclosure is supplied with required internal power supplies, cable supports and hardware to suit the specific vendor's access point or other wireless equipment.
Proprietory Extronics models are part of a Meru powered wireless LAN system which consists of Extronics iWAP access points at the edge and centralized Meru controllers for management, security, and coordination for over-the-air reliability and quality of service (QoS).
MESH Ethernet routers provide reliable Ethernet connectivity over a high-performance, self-forming wireless mesh backbone – indoors, outdoors, or onboard moving vehicles. Powered by Firetide they have an Ethernet port for connecting network devices such as an IP camera, or other networks, to the wireless mesh.
- Permits the installation of equipment from many popular WLAN vendors
- ATEX II 2G EEx d IIC T5@Ta 55ºC max., T6@Ta 40ºC max.
- ATEX Ex tD A21 IP66 T100ºC@Ta55ºC max., T85ºC@Ta40ºC max.
- Factory Mutual Class I Division 1 approval pending
- IP66 rated marine grade epoxy painted aluminum enclosure
- One or two EEx e omni-directional antennas
- Optional surge arrestors and fiber-optic input
- Dual radio, tri-mode, Meru powered, best-in-class security, basic VoWLAN
- ATEX II 2 (1G) G EEx d [ia] IIC T5/T6
- Factory Mutual Class I Division 1 approval pending
- IP66 rated marine grade epoxy painted aluminum enclosure
- One or two 5dBi omni-directional antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Dual radio, Firetide AutoMesh routing protocol, bonded & linear modes
- ATEX II 2 (1G) G EEx d [ia] IIC T5/T6
- Factory Mutual Class I Division 1 approval pending
- IP66 rated marine grade epoxy painted aluminum enclosure
- One or two 5dBi omni-directional antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Dual radio, tri-mode, Meru powered, best-in-class security, basic VoWLAN
- ATEX II 3 G Ex nA [nL] IIC T3/T4/T5; II 2D Ex tD A21 IP66 T80ºC
- Factory Mutual Class I Division 2 approval pending
- IP66 rated 316L stainless steel enclosure
- Designed for one or two standard antennas or iANT200 Series intrinsically safe antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Dual radio, Firetide AutoMesh routing protocol, bonded & linear modes
- ATEX II 3 G Ex nA [nL] IIC T3/T4/T5; II 2D Ex tD A21 IP66 T80ºC
- Factory Mutual Class I Division 2 approval pending
- IP66 rated 316L stainless steel enclosure
- Designed for one or two standard antennas or iANT200 Series intrinsically safe antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Install WLAN hardware from your preferred vendor including Aeroscout, Meru, Symbol, Cisco, Firetide, etc.
- IP66 rated 316L stainless steel enclosure
- Designed for non-classified, general-purpose locations
- Designed for one or two standard antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Dual radio, tri-mode, Meru powered, best-in-class security, basic VoWLAN
- IP66 rated 316L stainless steel enclosure
- Designed for non-classified, general-purpose locations
- Designed for one or two standard antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Dual radio, Firetide AutoMesh routing protocol, bonded & linear modes
- Designed for non-classified, general-purpose locations
- IP66 rated 316L stainless steel enclosure
- Designed for one or two standard antennas
- Optional surge arrestors, multimode fiber-optic inputs, plug & socket cable entry, enclosure heating & cooling
- Powered from PC USB port, supports USB 2.0
- ATEX II 2(1) G Ex em [ia] II T4
- Compact form factor permits mounting inside Ex PC enclosures
- 802.11 b/g WiFi
- IP66 rated marine grade epoxy painted aluminum enclosure
- For use with Extronics iANT200 intrinsically safe antennas
- Multi-functional module may be used as a an access point, wireless bridge (client), or wireless repeater
- Turn any 10/100 Ethernet device into a wireless device
- Connect two networks together without wire or fiber optic link
- Extend the range covered by a wireless network
- Tri-band 2.4 / 5.0 / 5.4 GHz
- II 1GD Ex ia IIC T4, Ex iaD 20 T135°C, I M1 Ma Ex ia I
- IP20 DIN rail housing may be mounted in IP6X Zone 1 enclosure
You may also be interested in these related products:
antennas • mission critical communication • RFID tags & readers • wireless telemetry • track & locate
antennas • mission critical communication • RFID tags & readers • wireless telemetry • track & locate