Newson Gale's continuous ground loop monitoring solution with visual indication
The Bond-Rite® monitors the resistance between the clamp teeth back to the ground bar to 10 ohms or less and cannot be adjusted by operators. DOES NOT require calibration at installation or throughout its lifecycle.
The remote power supply unit can be mounted in Class I, II Division 2 locations. Refer to technical specification for additional HAZLOC certification details. The marshalling box can be installed in Class I, II and III Division 1 and 2 locations and distribute power to up to 10 Bond-Rite® REMOTE units.
Operators are provided with a simple “GO/NO-GO” indication via a highly visible flashing green LED located in the wall mounted enclosure. The operators do not need to be trained to use HAZLOC multi-meters which can be complex and costly.
Utilizes a heavy-duty stainless-steel clamp, that combines sharp tungsten carbide teeth with a strong torsion spring to establish, and maintain, a positive connection to the metal object (e.g., drums) for the duration of the loading/unloading operation. Grounding clamps with global certification that DO NOT contain any insulating materials (rubber handles/plastic) that exceed the volume or surface area for hazardous locations.
The intrinsically safe monitoring circuit can be supplied in a GRP or stainless-steel enclosure that can be mounted on walls and gantries within the hazardous location.
The HAZLOC certification permits the use of the Bond-Rite® REMOTE in the highest hazardous locations (Class I, II and III Division 1 & 2) due to its intrinsically safe ‘ia’ design.
